Details

---

BUY 2MBI400U7H-120-52 https://www.utsource.net/itm/p/12542795.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Breakdown Voltage	BV	-	-	700	V	Maximum repetitive peak reverse voltage
Continuous Drain Current	ID	-	-	400	A	Continuous drain current at Tc = 25°C
Power Dissipation	PD	-	-	120	kW	Maximum power dissipation
Junction Temperature	Tj	-20	-	175	°C	Operating junction temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range
Gate Charge	Qg	-	120	-	nC	Total gate charge at VGS = 15V, IDS = 200A
Input Capacitance	Ciss	-	3800	-	pF	Input capacitance at VDS = 500V, VGS = 0V
Output Capacitance	Coff	-	290	-	pF	Output capacitance at VDS = 500V, IDS = 0A
Reverse Transfer Capacitance	Crss	-	900	-	pF	Reverse transfer capacitance at VDS = 500V, IDS = 0A
Turn-on Delay Time	td(on)	-	30	-	ns	Turn-on delay time at VGS = 15V, IDS = 200A
Rise Time	tr	-	60	-	ns	Rise time at VGS = 15V, IDS = 200A
Turn-off Delay Time	td(off)	-	35	-	ns	Turn-off delay time at VGS = -15V, IDS = 200A
Fall Time	tf	-	70	-	ns	Fall time at VGS = -15V, IDS = 200A

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Use appropriate heat sinks to manage thermal dissipation.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure all connections are secure and free from shorts or open circuits.

3. Thermal Management:

   • The maximum junction temperature (Tj) should not exceed 175°C.
   • Use thermal paste and heatsinks to enhance heat dissipation.

4. Gate Drive:

   • Apply the correct gate voltage (VGS) to ensure reliable operation.
   • Use a gate resistor to control switching speed and reduce electromagnetic interference (EMI).

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage due to excessive current.
   • Monitor the drain current (ID) to ensure it does not exceed the maximum rating.

6. Storage and Transportation:

   • Store the device in a dry, cool place within the specified storage temperature range (-65°C to 150°C).
   • Handle with care during transportation to avoid mechanical stress.

7. Testing:

   • Perform initial testing under controlled conditions to verify performance.
   • Use appropriate test equipment and follow safety guidelines.

8. Compliance:

   • Ensure the device is used in compliance with relevant standards and regulations.
   • Refer to the datasheet for detailed specifications and application notes.

(For reference only)