Details

---

BUY V23086-C1001-A403 https://www.utsource.net/itm/p/12542991.html

Parameter	Value	Unit
Part Number	V23086-C1001-A403	-
Type	Voltage Regulator	-
Input Voltage Range	4.5	V
Output Voltage	3.3	V
Output Current	1000	mA
Quiescent Current	1.2	mA
Dropout Voltage	0.3	V
Operating Temperature	-40 to 125	°C
Package	SOT-223	-
Storage Temperature	-65 to 150	°C

Instructions:

1. Power Supply Connection:

   • Connect the input voltage (4.5V to 12V) to the VIN pin.
   • Connect the output voltage (3.3V) to the VOUT pin.
   • Ensure the GND pins of both input and output are connected to a common ground.

2. Capacitors:

   • Place a 10μF ceramic capacitor between VIN and GND as close to the regulator as possible.
   • Place a 10μF ceramic capacitor between VOUT and GND to stabilize the output.

3. Thermal Management:

   • The device is designed to operate within the specified temperature range. However, for high current applications, ensure adequate heat sinking or cooling to prevent overheating.

4. PCB Layout:

   • Use wide traces for power and ground connections to minimize resistance and voltage drop.
   • Keep the layout compact to reduce noise and improve stability.

5. Storage:

   • Store the device in a dry environment to avoid moisture damage.
   • Handle with care to prevent static discharge which can damage the component.

6. Testing:

   • Before final assembly, test the regulator on a breadboard or prototype PCB to ensure it meets the required specifications.
   • Measure the output voltage under load conditions to verify proper operation.

(For reference only)