Details

---

BUY PCM63P-K https://www.utsource.net/itm/p/12542995.html

Parameter	Description	Value
Part Number	Product Identifier	PCM63P-K
Type	Category of the device	Relay
Coil Voltage	Voltage required to energize the relay coil	24VDC
Coil Power	Power consumption of the relay coil	0.5W
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage that can be switched by contacts	10A, 250VAC
Insulation Voltage	Dielectric strength between contacts and coil	1000VAC
Operating Temperature	Range of ambient temperature for operation	-40°C to 85°C
Switching Time	Time taken for contacts to change state	10ms (max)
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure	100 thousand cycles
Terminal Type	Type of terminals provided	Screw
Mounting	Method of installation	Panel mount
Dimensions	Physical size of the component	22.5 x 17.5 x 27.5 mm

Instructions:

1. Installation:

   • Ensure the relay is mounted in a location where the operating temperature range (-40°C to 85°C) can be maintained.
   • Use the screw terminals to connect the coil and contacts according to your circuit requirements.

2. Coil Connection:

   • Connect the specified coil voltage (24VDC) to energize the relay. Ensure the polarity is correct if the relay coil is polarized.

3. Contact Connection:

   • Wire the load to the normally open (NO) or normally closed (NC) contacts as needed. Do not exceed the contact rating (10A, 250VAC).

4. Operation:

   • When the coil is energized, the common terminal switches from NC to NO. Ensure the switching time (10ms max) is accounted for in your application.

5. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage, especially if approaching the mechanical life limit (10 million cycles).

6. Safety Precautions:

   • Always disconnect power before performing any maintenance or adjustments.
   • Respect the insulation voltage (1000VAC) to avoid electrical hazards.

(For reference only)