Details

---

BUY XCF01SVOG20C https://www.utsource.net/itm/p/12543042.html

Parameter	Description	Value
Device Type	Configuration Memory Device	XCF01SVOG20C
Density	Memory Density	20 Mbit
Package	Package Type	FBGA
Pin Count	Number of Pins	160
Operating Voltage	Supply Voltage Range	1.8V ± 5%
Temperature Range	Operating Temperature Range	-40°C to 100°C
Programming Voltage	Voltage for Programming	3.3V ± 5%
Programming Time	Typical Time for Full Device Programming	15 seconds
Data Retention	Minimum Data Retention at 25°C	20 years
Endurance	Write/Erase Cycles	10,000
Access Time	Typical Access Time	55 ns
Standby Current	Maximum Standby Current at 1.8V	10 μA
Active Current	Maximum Active Current at 1.8V	50 mA
Programming Current	Maximum Current During Programming	100 mA
ECC	Error Correction Code	8-bit ECC
Security Features	Security Options	Write Protect
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the specified range of 1.8V ± 5%.
   • Connect the ground (GND) pin to a stable ground reference.

2. Programming:

   • Apply the programming voltage (VPP) of 3.3V ± 5% to the appropriate pins during the programming process.
   • Use a compatible programmer to load the configuration data into the device.
   • The typical time for full device programming is 15 seconds.

3. Data Retention:

   • The device retains data for a minimum of 20 years at 25°C. Higher temperatures may reduce data retention time.

4. Endurance:

   • The device supports up to 10,000 write/erase cycles. Exceeding this limit may degrade performance or reliability.

5. Access Time:

   • The typical access time is 55 nanoseconds. Ensure that your system design accounts for this delay.

6. Current Consumption:

   • The maximum standby current is 10 μA, and the maximum active current is 50 mA. The maximum programming current is 100 mA.

7. Error Correction:

   • The device includes 8-bit ECC to detect and correct single-bit errors.

8. Security:

   • Use the write protect feature to prevent accidental overwriting of critical data.

9. Environmental Considerations:

   • The device is RoHS compliant, ensuring it meets environmental standards for restricted substances.

10. Handling:

    • Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and installation.

(For reference only)