Details

---

BUY CD4053BF https://www.utsource.net/itm/p/12543056.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage (VDD)		-0.5		18	V
Input Voltage (VIN)		-0.5		VDD+0.5	V
Output Voltage (VOH)	VDD = 15V, IOH = -1mA		13.8		V
Output Voltage (VOL)	VDD = 15V, IOL = 1mA		1.2		V
Leakage Current (IL)	VDD = 15V			1	μA
Switching Time (tSW)	VDD = 15V		45		ns

Instructions for CD4053BF

1. Power Supply Connection:

   • Connect the power supply pins (VDD and GND) to the appropriate voltage levels as specified in the table.

2. Signal Input Handling:

   • Ensure input signals do not exceed the supply voltage range by more than 0.5V to prevent damage or improper operation.

3. Output Signal Monitoring:

   • Monitor output voltages VOH and VOL under specified current conditions to ensure they fall within acceptable ranges for proper logic level interpretation.

4. Leakage Current Consideration:

   • Be aware of leakage currents, especially in low-power applications, to avoid unexpected power consumption.

5. Switching Speed Optimization:

   • Account for the switching time when designing timing-sensitive circuits to ensure reliable performance.

6. Handling Electrostatic Discharge (ESD):

   • The device is sensitive to ESD; use appropriate handling practices and protective equipment during installation and testing.

7. Storage and Operating Temperature:

   • Store and operate the device within recommended temperature ranges to maintain reliability and longevity.

8. Circuit Design Recommendations:

   • Incorporate decoupling capacitors close to the power supply pins to reduce noise and improve stability.
   • Use pull-up or pull-down resistors on inputs if necessary to prevent floating states.

For detailed specifications and further information, refer to the official datasheet provided by the manufacturer.

(For reference only)