Details

---

BUY SB80486DX2-50 https://www.utsource.net/itm/p/12543080.html

Parameter	Specification
Product Name	SB80486DX2-50
Type	Microprocessor
Family	Intel 80486
Clock Speed	50 MHz
Voltage Supply	5V
Cache	8 KB L1 Cache
Data Bus Width	32 bits
Address Bus Width	32 bits
Manufacturing Process	CHMOS IV
Package Type	PGA (Pin Grid Array)
Pin Count	169
Operating Temperature	0°C to 70°C

Instructions for Use:

1. Installation: Ensure that the socket on the motherboard is designed for a PGA package with 169 pins. Carefully align the processor with the socket, ensuring correct orientation as indicated by the notch or triangle mark.

2. Power Supply: The SB80486DX2-50 requires a stable 5V power supply. Verify that the power supply unit can deliver sufficient current and that all connections are secure.

3. Cooling: Adequate cooling is essential due to the heat generated at 50 MHz. Attach a heatsink or fan cooler to the top of the processor. Ensure there is adequate airflow within the system case.

4. BIOS/CMOS Setup: After installation, enter the BIOS/CMOS setup during boot to configure the system settings according to the processor specifications. Adjust the clock speed settings if necessary.

5. Testing: Once installed, perform a system test to ensure the processor is functioning correctly. Monitor system stability under load.

6. Maintenance: Periodically check the cooling solution to ensure it remains effective. Keep the system clean and free from dust accumulation.

For detailed technical support and more specific instructions, refer to the official Intel documentation or consult a professional technician.

(For reference only)