Details

---

BUY Q8025L6 https://www.utsource.net/itm/p/12543100.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	Q8025L6	-
Type	Component Type	Inductor	-
Frequency Range	Operating Frequency	100 kHz - 10 MHz	Hz
Inductance	Nominal Inductance	25	μH
Tolerance	Inductance Tolerance	±10%	%
DC Resistance (DCR)	Direct Current Resistance	0.15	Ω
Saturation Current	Current at which inductance drops by 10%	3.5	A
Temperature Coefficient	Change in inductance with temperature	±200 ppm/°C	ppm/°C
Operating Temperature	Temperature Range for Operation	-40 to +125	°C
Case Size	Physical Dimensions	8.0 x 8.0 x 6.0	mm
Mounting Type	Method of Attachment	Surface Mount	-
Packaging	Quantity per Reel	1000	-

Instructions:

1. Handling:

   • Handle the Q8025L6 with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be kept within 10 seconds.

3. Mounting:

   • Ensure the PCB is clean and free of contaminants.
   • Place the Q8025L6 on the PCB with the correct orientation.
   • Apply a small amount of flux to the pads for better solder adhesion.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Use within 6 months of receipt for optimal performance.

5. Testing:

   • Measure the inductance using an LCR meter to ensure it falls within the specified tolerance.
   • Check the DC resistance to ensure it meets the specified value.

6. Applications:

   • Suitable for use in power supply circuits, filtering applications, and signal processing circuits where high-frequency performance is required.

(For reference only)