Details

---

BUY MWIC930N https://www.utsource.net/itm/p/12543106.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VDD	2.7	-	5.5	V
Operating Current	IDD	-	10	-	μA
Output Current	IOUT	-	20	-	mA
Output Voltage Range	VOUT	0	-	VDD	V
Input Capacitance	CIN	-	10	-	pF
Output Capacitance	COUT	-	100	-	pF
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the VDD pin to the power source and GND pin to ground.

2. Output Configuration:

   • The output current (IOUT) can be up to 20mA.
   • The output voltage (VOUT) can vary from 0V to VDD.
   • Use appropriate load resistors or devices connected to the output to ensure the current does not exceed the maximum rating.

3. Capacitance:

   • Use input capacitance (CIN) of approximately 10pF to stabilize the input.
   • Use output capacitance (COUT) of approximately 100pF to stabilize the output.

4. Temperature Considerations:

   • The device operates within a temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

5. Handling:

   • Handle the device with care to avoid damage.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

6. Testing:

   • Before integrating the device into a circuit, test it under typical operating conditions to ensure it meets the required specifications.

7. Mounting:

   • Mount the device on a PCB (Printed Circuit Board) using standard surface mount technology (SMT) techniques.
   • Ensure proper soldering and avoid overheating during the soldering process.

8. Troubleshooting:

   • If the device does not function as expected, check the power supply, connections, and load.
   • Verify that the operating conditions (voltage, current, temperature) are within the specified ranges.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)