Details

---

BUY VT6103 https://www.utsource.net/itm/p/12543107.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range	2.7	-	5.5	V
Quiescent Current	Current consumption in active mode	-	40	-	μA
Output Current	Maximum output current per channel	-	50	-	mA
Channel Count	Number of channels	-	3	-
Operating Temp	Temperature range for normal operation	-40	-	85	°C
Storage Temp	Temperature range for storage	-55	-	150	°C
Input Capacitance	Capacitance at input pins	-	10	-	pF
Output Impedance	Impedance at output pins	-	30	-	Ω
ESD Rating	Electrostatic discharge tolerance	-	2	-	kV

Instructions:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Connect the power supply to the VCC and GND pins.

2. Channel Configuration:

   • The VT6103 has 3 channels. Each channel can be controlled independently.
   • Connect the load to the output pins (OUT1, OUT2, OUT3).

3. Current Limitation:

   • Do not exceed 50mA per channel to avoid damage to the device.
   • If higher currents are required, consider using external transistors or drivers.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device between -55°C and 150°C.

5. Input Signal:

   • Apply control signals to the input pins (IN1, IN2, IN3) to activate the corresponding output channels.
   • Ensure the input capacitance is considered in your circuit design to avoid signal distortion.

6. ESD Protection:

   • Handle the device with care to avoid electrostatic discharge.
   • Use proper ESD protection measures during handling and installation.

7. Mounting and Layout:

   • Follow standard PCB layout guidelines to ensure reliable operation.
   • Keep traces short and direct to minimize noise and interference.

8. Testing:

   • After assembly, test each channel individually to ensure proper functionality.
   • Verify that the output current does not exceed the specified limits.

(For reference only)