Details

---

BUY MAX3157CAI https://www.utsource.net/itm/p/12543132.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	2.7	-	5.5	V
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Data Rate	fDATA	-	1.2	2.5	Mbps
Power Consumption	IDD	-	2.5	-	mA
Input Impedance	Zin	-	100	-	k惟
Output Impedance	Zout	-	50	-	惟
Differential Input Range	VINdiff	-0.3	-	5.8	V
Common-Mode Input Range	VINcm	-0.3	-	5.8	V
CMOS Output High Level	VOH	0.9	-	VCC-0.1	V
CMOS Output Low Level	VOL	0	-	0.1	V
Propagation Delay	tpd	-	150	-	ns
Rise Time	tr	-	100	-	ns
Fall Time	tf	-	100	-	ns

Instructions for Using the MAX3157CAI

1. Power Supply:

   • Connect the VCC pin to a power supply within the range of 2.7V to 5.5V.
   • Ensure the ground (GND) pin is connected to the system ground.

2. Data Lines:

   • Connect the differential input lines (DI+ and DI-) to the data source.
   • Connect the differential output lines (DO+ and DO-) to the receiver.

3. Biasing:

   • The device includes internal biasing resistors, so no external biasing components are typically required.

4. Termination:

   • For optimal performance, terminate the differential lines with 100惟 resistors at both the transmitter and receiver ends.

5. Configuration:

   • The device can be configured using control pins or through an I2C interface, depending on the specific application requirements.

6. Operating Temperature:

   • Ensure the operating temperature remains within the -40掳C to 85掳C range to avoid damage or performance degradation.

7. Storage:

   • Store the device in a controlled environment with temperatures between -65掳C and 150掳C to prevent damage.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.

9. Testing:

   • Before integrating the device into a larger system, test it individually to ensure proper functionality.

10. Documentation:

    • Refer to the datasheet and application notes for detailed information and specific use cases.

(For reference only)