Details

---

BUY DG411DJ https://www.utsource.net/itm/p/12543490.html

Parameter	Description	Min	Typ	Max	Unit
VDD	Supply Voltage	2.7	-	5.5	V
IDD	Supply Current (Quiescent)	-	0.6	-	mA
VIL	Input Low Voltage	0.0	-	0.8	V
VIH	Input High Voltage	2.0	-	5.5	V
IIL	Input Low Current	-1	-	-	μA
IIH	Input High Current	-	-	1	μA
VOL	Output Low Voltage	0.0	-	0.4	V
VOH	Output High Voltage	2.4	-	5.5	V
IOL	Output Low Current	-	-	-16	mA
IOH	Output High Current	-	-	16	mA
tpd	Propagation Delay Time	-	5.5	-	ns
tplh	Low to High Propagation Delay	-	3.5	-	ns
tphl	High to Low Propagation Delay	-	3.5	-	ns
tskew	Skew	-	0.5	-	ns
tslew	Slew Rate	-	0.5	-	V/ns
VGS(th)	Gate-Source Threshold Voltage	0.8	1.2	1.6	V
RDS(on)	On-State Resistance	-	25	-	Ω

Instructions for Using the DG411DJ:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 2.7V to 5.5V.
   • Connect the V_DD pin to the positive supply and GND to the ground.

2. Input Signals:

   • Apply input signals (V_IL and V_IH) within the specified ranges to avoid damage.
   • Ensure the input currents (I_IL and I_IH) do not exceed the maximum ratings.

3. Output Signals:

   • The output voltages (V_OL and V_OH) should be within the specified limits.
   • The output currents (I_OL and I_OH) should not exceed the maximum ratings.

4. Timing Parameters:

   • Check the propagation delay times (t_pd, t_plh, t_phl) to ensure proper timing in your circuit.
   • Consider the skew (t_skew) and slew rate (t_slew) for high-speed applications.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high power levels.
   • Refer to the datasheet for thermal resistance values and recommended PCB layout guidelines.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge.
   • Follow ESD (Electrostatic Discharge) protection guidelines during handling and installation.

7. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Use proper storage containers and follow recommended storage conditions.

(For reference only)