Details

---

BUY MBRB2535CTLT4G https://www.utsource.net/itm/p/12543491.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	35	V
Maximum Average Rectified Output Current	IORM	2.5	A
Maximum RMS Current (85°C)	IRMS	1.76	A
Maximum DC Blocking Current	IFSM	30	A
Junction Temperature Range	TJ	-55 to 150	°C
Storage Temperature Range	TSTG	-55 to 150	°C
Operating Temperature Range	TOPR	-55 to 150	°C
Forward Voltage at Rated Current	VF@IF	1.05	V
Reverse Leakage Current at 25°C	IR@25°C	100	μA
Reverse Recovery Time	trr	35	ns

Instructions for Use:

1. Mounting and Handling:

   • Handle the MBRB2535CTLT4G with care to avoid mechanical damage.
   • Ensure that the device is mounted on a flat, clean surface to ensure good thermal contact.
   • Use appropriate tools and techniques to avoid excessive force during soldering.

2. Soldering:

   • Preheat the PCB to 100-150°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should not exceed 10 seconds per connection.
   • Allow the device to cool naturally after soldering.

3. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to avoid reverse polarity.
   • Ensure that the maximum ratings (VRRM, IORM, etc.) are not exceeded during operation.
   • Use appropriate decoupling capacitors to filter out noise and stabilize the power supply.

4. Thermal Management:

   • Ensure adequate heat dissipation by using a heatsink if necessary.
   • Monitor the junction temperature (TJ) to prevent overheating.
   • Avoid operating the device in environments where the ambient temperature exceeds the specified range.

5. Storage:

   • Store the MBRB2535CTLT4G in a dry, cool place away from direct sunlight.
   • Protect the device from static electricity by storing it in anti-static packaging.

6. Testing:

   • Before installing the device in a circuit, perform a visual inspection to ensure there are no physical defects.
   • Test the device under controlled conditions to verify its performance parameters.

7. Safety:

   • Follow all safety guidelines and regulations when handling and using the MBRB2535CTLT4G.
   • Use appropriate personal protective equipment (PPE) when working with high voltages or currents.

(For reference only)