Details

---

BUY AR8033-AL1A https://www.utsource.net/itm/p/12543503.html

Below is the parameter table and instructions for the AR8033-AL1A:

AR8033-AL1A Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	VIN	2.7	-	5.5	V
Output Voltage	VOUT	-	3.3	-	V
Output Current	IOUT	-	300	-	mA
Quiescent Current	IQ	-	4.5	-	μA
Dropout Voltage	VDROPOUT	-	200	-	mV
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C
Thermal Resistance	θJA	-	120	-	°C/W

Instructions for AR8033-AL1A

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V.
   • Do not exceed the maximum input voltage to avoid damaging the device.

2. Output Voltage (VOUT):

   • The output voltage is fixed at 3.3V.
   • No external components are required to set the output voltage.

3. Output Current (IOUT):

   • The maximum output current is 300mA.
   • Ensure that the load does not exceed this limit to prevent overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is typically 4.5μA.
   • This low quiescent current makes the device suitable for battery-powered applications.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is typically 200mV.
   • Ensure that the input voltage is at least 200mV higher than the output voltage to maintain regulation.

6. Operating Temperature (TOPR):

   • The device can operate within a temperature range of -40°C to 85°C.
   • Avoid operating the device outside this range to ensure reliable performance.

7. Storage Temperature (TSTG):

   • The device can be stored within a temperature range of -65°C to 150°C.
   • Store the device in a dry environment to prevent moisture damage.

8. Thermal Resistance (θJA):

   • The thermal resistance from junction to ambient is typically 120°C/W.
   • Ensure proper heat dissipation if the device will be operated at high power levels or in high ambient temperatures.

9. Mounting and Layout:

   • Use a good quality PCB with adequate copper area for heat dissipation.
   • Place the device close to the load to minimize trace resistance and inductance.
   • Use bypass capacitors (typically 10μF and 0.1μF) close to the input and output pins to filter noise and improve stability.

10. Handling:

    • Handle the device with care to avoid static discharge.
    • Follow ESD (Electrostatic Discharge) precautions when handling the device.

By following these instructions, you can ensure optimal performance and reliability of the AR8033-AL1A in your application.

(For reference only)