Details

---

BUY WIMA 100V 0.22UF 224 https://www.utsource.net/itm/p/12543772.html

Parameter	Value
Capacitance	0.22 μF (224)
Voltage Rating	100 V DC
Tolerance	±5%
Temperature Range	-55°C to +85°C
Dielectric	Polypropylene
Operating Frequency	100 kHz
Lead Spacing	7.5 mm
Lead Length	2.5 mm
Case Size	5 x 6.5 mm
Weight	0.05 g

Instructions:

1. Handling:

   • Handle the capacitor with care to avoid mechanical stress.
   • Do not apply excessive force to the leads during soldering or handling.

2. Soldering:

   • Preheat the PCB to 100°C to 120°C before soldering.
   • Use a soldering iron with a temperature of 350°C for no more than 3 seconds per lead.
   • Allow the capacitor to cool naturally after soldering.

3. Mounting:

   • Ensure the leads are securely soldered to the PCB.
   • Avoid bending the leads excessively as this can cause mechanical stress and potential damage to the capacitor.

4. Storage:

   • Store in a dry environment with a relative humidity of less than 60%.
   • Keep away from direct sunlight and extreme temperatures.

5. Usage:

   • Ensure the voltage applied does not exceed the rated voltage of 100 V DC.
   • Check the polarity if using in circuits where polarity is important.
   • Regularly inspect the capacitor for signs of wear or damage.

6. Disposal:

   • Dispose of the capacitor according to local environmental regulations.
   • Do not incinerate the capacitor as it may release harmful substances.

(For reference only)