Details

---

BUY TDA7294 https://www.utsource.net/itm/p/12543784.html

Parameter	Description	Value	Unit
Supply Voltage (Vcc)	Operating voltage range	10 to 50	V
Quiescent Current	Current consumption at no load	200	mA
Output Power	Maximum output power into 8Ω load	60	W
Frequency Response	Range over which the amplifier maintains a flat response	20 to 20,000	Hz
Signal-to-Noise Ratio (SNR)	Ratio of signal power to noise power	105	dB
Total Harmonic Distortion (THD)	Percentage of harmonic distortion at rated power	0.05	%
Input Sensitivity	Voltage required at input for rated output	750	mV
Input Impedance	Resistance offered by the input terminals	47	kΩ
Protection Features	Built-in protection mechanisms	Overvoltage, Overcurrent, Thermal	-
Operating Temperature Range	Range of ambient temperatures for operation	-25 to +85	°C
Storage Temperature Range	Range of temperatures for storage	-40 to +125	°C

Instructions for Using TDA7294:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 10 to 50V.
   • Use a stable and well-filtered power supply to avoid noise and instability.

2. Heat Dissipation:

   • The TDA7294 can dissipate significant heat during operation. Mount it on a heatsink with adequate surface area and thermal conductivity.
   • Ensure proper ventilation around the heatsink to prevent overheating.

3. Input Connection:

   • Connect the audio signal to the input terminals. The input sensitivity is 750mV, so ensure the input signal does not exceed this level to avoid clipping.
   • The input impedance is 47kΩ, which is suitable for most standard audio sources.

4. Output Connection:

   • Connect the speaker to the output terminals. The TDA7294 can drive an 8Ω load with up to 60W of power.
   • For best performance, use high-quality speaker cables and ensure they are securely connected.

5. Protection:

   • The TDA7294 has built-in protection against overvoltage, overcurrent, and thermal overload. However, it is still important to operate within the specified parameters to avoid damage.
   • If the amplifier shuts down due to overheating, allow it to cool before restarting.

6. Frequency Response:

   • The TDA7294 maintains a flat frequency response from 20Hz to 20,000Hz, making it suitable for a wide range of audio applications.

7. Signal-to-Noise Ratio:

   • The SNR of 105dB ensures that the background noise is minimal, providing a clean and clear audio output.

8. Total Harmonic Distortion:

   • The THD of 0.05% at rated power indicates that the amplifier produces very little distortion, preserving the quality of the original audio signal.

9. Operating and Storage Temperature:

   • Operate the TDA7294 within the temperature range of -25°C to +85°C.
   • Store the device in a dry place within the temperature range of -40°C to +125°C to prevent damage.

By following these instructions, you can ensure optimal performance and longevity of the TDA7294 audio amplifier.

(For reference only)