Details

---

BUY LMC6484IM https://www.utsource.net/itm/p/12543786.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Continuous Operation	2.7	-	15	V
Quiescent Current	IQ	All amplifiers active	-	90	-	μA
Input Offset Voltage	VOS	-	-	300	-	μV
Input Bias Current	IB	-	-	50	-	pA
Common-Mode Input Voltage Range	VCM	-	-	VCC - 1.2	-	V
Output Voltage Swing	VOUT	No Load	0	-	VCC - 1.5	V
Slew Rate	SR	-	-	0.3	-	V/μs
Gain Bandwidth Product	GBP	-	-	2.2	-	MHz
Large Signal Voltage Gain	AV	VIN = 200 mVpp	-	100	-	dB

Instructions for Using LMC6484IM

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 15V.
   • Connect a decoupling capacitor (0.1 μF) close to the power pins to stabilize the supply.

2. Input Signals:

   • The common-mode input voltage range should be from ground to V_CC - 1.2V.
   • Keep input signals within the specified range to avoid distortion or damage.

3. Output Configuration:

   • The output voltage swing is typically from 0V to V_CC - 1.5V with no load.
   • For maximum output swing, ensure the load resistance is appropriate for the application.

4. Biasing and Stability:

   • The input bias current is very low (50 pA typical), which makes the LMC6484IM suitable for high-impedance applications.
   • Use appropriate feedback resistors to set the gain and ensure stability.

5. Temperature Considerations:

   • The device is designed to operate over a wide temperature range, but performance parameters may vary slightly at extreme temperatures.

6. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store in a dry environment to prevent moisture damage.

7. Application Notes:

   • For specific applications, refer to the datasheet for detailed circuit diagrams and application notes.
   • Consider using the device in low-power, high-precision, and high-impedance applications where its low bias current and wide supply range are beneficial.

(For reference only)