Details

---

BUY P82B96DR https://www.utsource.net/itm/p/12543795.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	5	5.5	V	Operating supply voltage
Standby Current	ICC	-	100	300	μA	Supply current in standby mode
Operating Current	IOP	-	10	30	mA	Maximum operating current
Input Voltage Range	VIN	0	-	5.5	V	Range of input voltages
Output Voltage Range	VOUT	0	-	5.5	V	Range of output voltages
Maximum Data Rate	fMAX	-	100	400	kbps	Maximum data rate for reliable operation
Common-Mode Rejection	CMRR	-	80	100	dB	Common-mode rejection ratio at 60 Hz
Isolation Voltage	VIORM	-	2500	5000	Vrms	Maximum isolation voltage between input and output
Propagation Delay	tPD	20	35	50	ns	Propagation delay from input to output
Skew	tSKEW	-	10	20	ns	Maximum skew between differential outputs
Storage Temperature	TSTG	-40	-	85	°C	Temperature range for storage
Operating Temperature	TOPR	-40	-	85	°C	Temperature range for operation

Instructions for Using P82B96DR

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
   • Connect the VCC pin to a stable power source and the GND pin to ground.

2. Input and Output Connections:

   • Connect the input signals to the appropriate input pins (VIN).
   • Ensure the input voltage is within the range of 0V to 5.5V.
   • Connect the output signals to the corresponding output pins (VOUT).

3. Data Transmission:

   • The device supports data rates up to 400 kbps. For reliable operation, maintain the data rate within the specified range.
   • Check the propagation delay (tPD) and skew (tSKEW) to ensure proper timing and synchronization.

4. Isolation:

   • The P82B96DR provides electrical isolation up to 5000 Vrms. Ensure that the isolation barrier is not exceeded to avoid damage.
   • Use the device in applications where galvanic isolation is required, such as between different power domains or for safety purposes.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.
   • Store the device in a temperature-controlled environment within the range of -40°C to 85°C.

6. Common-Mode Rejection:

   • The device has a common-mode rejection ratio (CMRR) of 80 to 100 dB at 60 Hz. This helps in rejecting common-mode noise, improving signal integrity.

7. Standby Mode:

   • When the device is in standby mode, the supply current (ICC) will be between 100 μA and 300 μA. Use this mode to reduce power consumption when the device is not actively transmitting data.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper soldering techniques and use appropriate tools to install the device on the PCB.

By following these parameters and instructions, you can ensure optimal performance and reliability of the P82B96DR in your application.

(For reference only)