Details

---

BUY TLP504A https://www.utsource.net/itm/p/12553494.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA	-	1.2	1.6	V
Peak Forward Current	IF(PK)	tP = 10 ms, duty cycle 1%	-	-	50	mA
Continuous Forward Current	IF	-	-	10	-	mA
Reverse Voltage	VR	-	-	5	-	V
Output Collector-Emitter Saturation Voltage	VCE(SAT)	IC = 10 mA, VCE = 5 V	-	0.3	0.5	V
Output Collector Current	IC	VCE = 5 V	-	10	-	mA
Isolation Voltage (RMS)	VIORMS	-	-	5000	-	V
Operating Temperature Range	TA	-	-40	25	85	°C
Storage Temperature Range	TSTG	-	-40	-	100	°C

Instructions for Use:

1. Forward Voltage (V_F):

   • Ensure that the forward voltage across the input LED does not exceed 1.6V when the forward current is 10mA.

2. Peak Forward Current (I_F(PK)):

   • The peak forward current should not exceed 50mA for a pulse width of 10ms and a duty cycle of 1%.

3. Continuous Forward Current (I_F):

   • The continuous forward current through the input LED should not exceed 10mA.

4. Reverse Voltage (V_R):

   • The reverse voltage across the input LED should not exceed 5V.

5. Output Collector-Emitter Saturation Voltage (V_CE(SAT)):

   • When the output transistor is saturated, the collector-emitter voltage should be between 0.3V and 0.5V with a collector current of 10mA and a V_CE of 5V.

6. Output Collector Current (I_C):

   • The maximum collector current through the output transistor should not exceed 10mA at a V_CE of 5V.

7. Isolation Voltage (RMS) (V_IORMS):

   • The device provides an isolation voltage of up to 5000V RMS.

8. Operating Temperature Range (T_A):

   • The device can operate within a temperature range of -40°C to 85°C.

9. Storage Temperature Range (T_STG):

   • The device can be stored within a temperature range of -40°C to 100°C.

Additional Notes:

• Ensure that all electrical connections are secure and meet the specified ratings.
• Avoid exceeding the maximum ratings to prevent damage to the device.
• For optimal performance, refer to the datasheet for detailed application notes and circuit diagrams.

(For reference only)