Details

---

BUY C302284-001 https://www.utsource.net/itm/p/12553495.html

Below is the parameter table and instructions for the C302284-001 component.

Parameter Table

Parameter	Value	Unit
Capacitance	220	pF
Tolerance	±5%
Voltage Rating (DC)	1000	V
Temperature Range	-55 to +125	°C
Dissipation Factor	≤ 0.1%	@ 1kHz
Insulation Resistance	≥ 1000	MΩ
Operating Frequency	10 Hz to 1 MHz
Case Size	3022	mm
Termination	Soldering
RoHS Compliance	Yes

Instructions

1. Storage and Handling:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.
   • Avoid exposure to corrosive environments.

2. Mounting:

   • Ensure the PCB is clean and free of contaminants before mounting.
   • Use a soldering iron with a temperature setting between 350°C and 400°C.
   • Apply solder to the pads and then place the component.
   • Avoid overheating the component during soldering; do not exceed 4 seconds per pad.
   • Allow the solder to cool naturally without applying any external force.

3. Testing:

   • Test the capacitance using a digital multimeter or LCR meter.
   • Ensure the measured capacitance is within the specified tolerance range.
   • Check for any short circuits or open circuits.

4. Environmental Considerations:

   • The component is RoHS compliant and suitable for use in environmentally friendly designs.
   • Dispose of the component according to local environmental regulations.

5. Operational Precautions:

   • Do not exceed the rated voltage or operating temperature range.
   • Ensure proper ventilation if used in high-temperature applications.
   • Regularly inspect the component for signs of wear or damage.

6. Troubleshooting:

   • If the capacitance is out of specification, check for incorrect soldering or damaged components.
   • If the component fails, replace it with a new one of the same type and specifications.

By following these instructions, you can ensure optimal performance and longevity of the C302284-001 component.

(For reference only)