Details

---

BUY SMBJ130A https://www.utsource.net/itm/p/12553563.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Breakdown Voltage	VBR	-	130	-	V	IC = 1 mA
Operating Junction Temperature	TJ	-65	-	150	°C
Peak Pulse Current	Ipp	-	28.9	-	A	tp = 10 ms, Duty Cycle = 0.01%
Reverse Current	IR	-	10	-	μA	VR = 130 V, TJ = 25°C
Forward Voltage	VF	-	1.2	-	V	IF = 1 mA
Capacitance	C	-	700	-	pF	VR = 0 V, f = 1 MHz
Storage Temperature	Tstg	-65	-	150	°C
Mounting Surface Temperature	Tm	-65	-	175	°C

Instructions for Use:

1. Mounting:

   • Ensure the mounting surface temperature does not exceed 175°C to avoid damage.
   • Use appropriate soldering techniques to ensure good thermal and electrical connections.

2. Operating Conditions:

   • The device is designed to operate within a junction temperature range of -65°C to 150°C.
   • Do not exceed the maximum peak pulse current of 28.9 A for pulse durations of 10 ms with a duty cycle of 0.01%.

3. Storage:

   • Store the device in a dry environment with temperatures between -65°C and 150°C to prevent degradation.

4. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

5. Testing:

   • When testing the device, ensure that the reverse voltage does not exceed 130 V to avoid breakdown.
   • Measure the forward voltage at a current of 1 mA to verify proper operation.

6. Capacitance:

   • The capacitance of 700 pF is measured at 0 V reverse voltage and 1 MHz frequency. This value can vary slightly under different conditions.

7. Reverse Current:

   • The reverse current should be kept below 10 μA at 130 V reverse voltage and 25°C junction temperature to ensure reliable operation.

(For reference only)