Details

---

BUY Z8018008PEG https://www.utsource.net/itm/p/12553578.html

Parameter	Description	Value
Part Number	Full part number of the device	Z8018008PEG
Package Type	Type of package	44-Pin PLCC
Operating Voltage	Supply voltage range	5.0V ± 5%
Operating Temperature	Temperature range for operation	-40°C to +85°C
Clock Frequency	Maximum clock frequency	10 MHz
Data Bus Width	Width of the data bus	8-bit
Address Bus Width	Width of the address bus	16-bit
I/O Ports	Number of programmable I/O ports	27
ROM	On-chip Read-Only Memory size	32KB
RAM	On-chip Random Access Memory size	2KB
Instruction Set	Type of instruction set architecture	Z80
Special Features	Additional features	Enhanced interrupt system, DMA

Instructions:

1. Power Supply Connection: Connect the Vcc pin to a 5.0V ± 5% power supply and GND pins to ground.
2. Clock Configuration: Ensure the external clock signal is within the specified frequency range (up to 10 MHz).
3. Reset Circuit: Implement a reset circuit that holds the /RESET pin low for at least two machine cycles after power-up.
4. Program Loading: Load programs into the on-chip ROM via appropriate programming tools or interfaces.
5. I/O Handling: Configure I/O ports as input or output using the appropriate instructions in your program.
6. Interrupt Management: Utilize the enhanced interrupt system for handling asynchronous events efficiently.
7. DMA Operations: For bulk data transfers, configure and utilize the Direct Memory Access (DMA) feature.
8. Operating Environment: Ensure the operating temperature stays within the specified range (-40°C to +85°C) to maintain reliability.

For detailed programming and application notes, refer to the official datasheet and technical documentation provided by the manufacturer.

(For reference only)