Details

---

BUY DSP1A-DC12V https://www.utsource.net/itm/p/12553580.html

Parameter	Value
Model	DSP1A-DC12V
Type	Digital Signal Processor
Input Voltage	DC 12V
Operating Temperature	-20°C to +70°C
Storage Temperature	-40°C to +85°C
Humidity	5% to 95% (Non-condensing)
Power Consumption	< 1W
Input Channels	4 (Analog)
Output Channels	4 (Analog)
Sampling Rate	48 kHz
Signal-to-Noise Ratio	> 100 dB
Frequency Response	20 Hz to 20 kHz
Crossover Filters	12 dB/octave to 48 dB/octave
Equalization	31-band parametric EQ
Delay	Up to 100 ms per channel
Remote Control	Optional via RS-232
Dimensions (LxWxH)	170 mm x 100 mm x 25 mm
Weight	0.5 kg

Instructions for Use

1. Power Connection:

   • Connect the DC 12V power supply to the power input terminal on the DSP1A-DC12V.
   • Ensure the power supply is stable and within the specified range.

2. Input Connections:

   • Connect your audio source to the analog input channels using RCA or XLR cables.
   • Verify that the input level is set appropriately to avoid distortion.

3. Output Connections:

   • Connect the output channels to your amplifiers or speakers using RCA or XLR cables.
   • Adjust the output levels as needed to match your system requirements.

4. Configuration:

   • Use the front panel controls or an external computer with the provided software to configure the DSP settings.
   • Set up crossover filters, equalization, and delay according to your specific audio setup needs.

5. Remote Control (Optional):

   • If using remote control, connect the RS-232 cable to the designated port on the DSP1A-DC12V and the control device.
   • Configure the remote control settings using the provided software.

6. Operation:

   • Turn on the DSP1A-DC12V and ensure all connections are secure.
   • Monitor the system performance and make any necessary adjustments using the front panel or software.

7. Maintenance:

   • Regularly check connections and ensure the unit is kept clean and dry.
   • Avoid exposing the unit to extreme temperatures or humidity.

8. Troubleshooting:

   • If you encounter issues, refer to the troubleshooting section in the user manual or contact technical support for assistance.

(For reference only)