Details

---

BUY SGF5N150UFTU https://www.utsource.net/itm/p/12553584.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Collector-Emitter Voltage	Vceo	-	-	1500	V
Collector-Base Voltage	Vcbo	-	-	1500	V
Emitter-Base Voltage	Vebo	-15	-	15	V
Continuous Collector Current	Ic	-	5	-	A	@ Tc = 25°C
Continuous Collector Current	Ic	-	3.5	-	A	@ Tc = 100°C
Continuous Emitter Current	Ie	-	5	-	A	@ Tc = 25°C
Continuous Emitter Current	Ie	-	3.5	-	A	@ Tc = 100°C
Power Dissipation	Ptot	-	-	240	W	@ Tc = 25°C
Power Dissipation	Ptot	-	-	175	W	@ Tc = 100°C
Total Device Dissipation	Ptot	-	-	240	W	@ Tc = 25°C
Total Device Dissipation	Ptot	-	-	175	W	@ Tc = 100°C
Junction Temperature	Tj	-	-	150	°C
Storage Temperature Range	Tstg	-55	-	150	°C
Thermal Resistance (Junction to Case)	Rthjc	-	0.8	-	K/W
Thermal Resistance (Junction to Ambient)	Rthja	-	1.6	-	K/W

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is mounted on a heatsink to manage thermal resistance effectively.
   • Handle the device with care to avoid mechanical stress or damage to the leads.

2. Electrical Connections:

   • Connect the collector, base, and emitter terminals correctly to avoid damage.
   • Use appropriate wire gauges to handle the current ratings.

3. Thermal Management:

   • Ensure that the junction temperature does not exceed 150°C to prevent thermal runaway.
   • Use thermal paste between the device and the heatsink to improve heat transfer.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Operate within the recommended operating conditions to ensure reliable performance.

5. Storage:

   • Store the device in a dry environment within the storage temperature range (-55°C to 150°C).
   • Avoid exposure to high humidity or corrosive environments.

6. Testing:

   • Before installation, test the device using a multimeter or an appropriate testing setup to ensure it meets the specified parameters.

7. Safety:

   • Always follow safety guidelines when handling high-voltage components.
   • Use protective equipment such as gloves and goggles when necessary.

(For reference only)