Details

---

BUY 1N4007 M7 https://www.utsource.net/itm/p/12553891.html

Parameter	Symbol	Min	Max	Unit
Maximum Repetitive Peak Reverse Voltage	VRSM	-	1000	V
Maximum DC Blocking Voltage	VRRM	-	1000	V
Maximum Average Forward Rectified Current (TA = 25°C)	IF(AV)	-	1.0	A
Maximum RMS Forward Current (TA = 25°C)	IF(RMS)	-	0.63	A
Maximum Non-Repetitive Peak Forward Surge Current (TJ = 25°C, 8.3 ms sine-half-wave)	IF(SM)	-	30.0	A
Maximum Junction Temperature	TJ	-	150	°C
Operating and Storage Temperature Range	TA	-55	150	°C
Forward Voltage at Rated Current (IF = 1.0A)	VF	-	1.1	V
Reverse Leakage Current at Maximum Reverse Voltage (VRRM = 1000V, TA = 25°C)	IR	-	5.0	μA

Instructions for Use:

1. Mounting:

   • Ensure that the diode is mounted in a way that minimizes thermal resistance to the heat sink.
   • Use appropriate mounting hardware and thermal compound if necessary.

2. Polarity:

   • The 1N4007 M7 diode has a clear marking on the cathode (the band on the diode). Ensure that the cathode is connected to the positive side of the circuit and the anode to the negative side.

3. Temperature Considerations:

   • Do not exceed the maximum junction temperature of 150°C. Ensure adequate cooling if the diode will be operating near its maximum current ratings.
   • Store the diode within the operating and storage temperature range of -55°C to 150°C.

4. Surge Current:

   • The diode can handle non-repetitive peak forward surge currents up to 30A for short durations (8.3 ms sine-half-wave). Ensure that any surge currents do not exceed this limit.

5. Reverse Voltage:

   • The diode is rated for a maximum repetitive peak reverse voltage of 1000V. Ensure that the reverse voltage applied to the diode does not exceed this value to avoid breakdown.

6. Forward Voltage:

   • At the rated current of 1.0A, the forward voltage drop across the diode is typically around 1.1V. This should be considered in power calculations and circuit design.

7. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and extreme temperatures.

8. Handling:

   • Handle the diode with care to avoid mechanical damage. Use proper ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

(For reference only)