Details

---

BUY BTS410E2 https://www.utsource.net/itm/p/12555217.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Continuous Drain Current	IDcont	-	120	-	A	Ta = 25°C, VGS = 10V
Pulse Drain Current	IDpulse	-	240	-	A	Tp = 10ms, VGS = 10V
Gate-Source Voltage	VGS(th)	1.8	-	3.6	V	ID = 1mA
Drain-Source On-Resistance	RDS(on)	2.5	3.0	3.5	mΩ	VGS = 10V, ID = 120A
Total Power Dissipation	PTOT	-	-	180	W	Ta = 25°C
Junction Temperature	TJ	-	-	175	°C
Storage Temperature	TSTG	-40	-	150	°C

Instructions for BTS410E2:

1. Installation:

   • Ensure that the device is mounted on a suitable heat sink to manage the heat dissipation effectively.
   • Use proper anti-static precautions during handling.

2. Operation:

   • The device operates optimally at gate-source voltages between 1.8V and 3.6V for threshold voltage.
   • For continuous operation, do not exceed the maximum continuous drain current of 120A at ambient temperature (25°C).

3. Pulse Operation:

   • During pulse conditions, the device can handle up to 240A for a pulse duration of 10ms.
   • Ensure that the duty cycle does not lead to excessive heating beyond the total power dissipation limit.

4. Thermal Management:

   • Keep the junction temperature below 175°C to avoid thermal shutdown or damage.
   • Regularly monitor the operating temperature, especially under heavy load conditions.

5. Storage:

   • Store in a dry environment within the temperature range of -40°C to 150°C.
   • Avoid exposure to high humidity to prevent corrosion or damage.

6. Electrical Characteristics:

   • Refer to the parameter table for detailed electrical characteristics and ensure all operating conditions are within specified limits to guarantee reliable performance.

7. Safety Precautions:

   • Always disconnect power before performing any maintenance or adjustments.
   • Follow all manufacturer guidelines and safety standards when integrating this component into a circuit.

(For reference only)