Details

---

BUY L9134 https://www.utsource.net/itm/p/12555247.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	2.4	-	5.5	V
Quiescent Current	IQ	-	300	600	μA
Output Current (per channel)	IO	0.3	-	1.0	A
Output Voltage Drop (high level)	VOH	-	0.7	1.4	V
Output Voltage Drop (low level)	VOL	-	0.4	0.8	V
Operating Temperature	TOP	-40	-	125	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Using L9134

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.4V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Quiescent Current:

   • The quiescent current (I_Q) is typically around 300 μA but can go up to 600 μA. This should be considered when designing the power supply circuit to ensure efficient power usage.

3. Output Current:

   • Each output channel can handle a maximum current of 1.0A. Ensure that the load connected to each channel does not exceed this limit to prevent damage to the device.

4. Output Voltage Drop:

   • When the output is high, the voltage drop (V_OH) is typically around 0.7V but can be as high as 1.4V.
   • When the output is low, the voltage drop (V_OL) is typically around 0.4V but can be as high as 0.8V.
   • These voltage drops should be taken into account when designing the circuit to ensure proper operation of connected components.

5. Operating Temperature:

   • The device is designed to operate within a temperature range of -40°C to 125°C. Ensure that the operating environment does not exceed these limits to avoid thermal stress and potential failure.

6. Storage Temperature:

   • When storing the device, keep it within a temperature range of -65°C to 150°C to maintain its integrity.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures during handling and assembly.

8. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure reliable connections without causing thermal damage to the device.
   • Avoid excessive heat and mechanical stress during mounting.

By following these guidelines, you can ensure optimal performance and reliability of the L9134 in your application.

(For reference only)