Details

---

BUY CX486SLC/e-V25QP https://www.utsource.net/itm/p/12555259.html

Parameter	Description	Value
Part Number	Full Part Number	CX486SLC/e-V25QP
Type	Component Type	Capacitor
Capacitance	Nominal Capacitance	10 μF
Voltage Rating	DC Voltage Rating	25 V
Tolerance	Capacitance Tolerance	±20% (M)
Temperature Coefficient	Temperature Coefficient	X7R (±15% from -55°C to +125°C)
Operating Temperature Range	Operating Temperature	-55°C to +125°C
Case Size	Physical Size	0805 (2012 Metric)
Termination	Termination Style	SMD (Surface Mount)
Compliance	RoHS Compliance	Yes
Packaging	Packaging Type	Tape & Reel
Lead-Free	Lead-Free Status	Yes

Instructions for Use:

1. Mounting: Place the capacitor on the PCB according to the design layout. Ensure that the orientation is correct if the capacitor is polarized.
2. Soldering: Use a soldering iron with a temperature setting appropriate for surface mount components, typically around 350°C. Apply solder to the pads and ensure good contact between the component and the PCB.
3. Inspection: After soldering, inspect the joints for proper wetting and the absence of bridges or voids.
4. Testing: Perform electrical testing to ensure the capacitor meets the specified capacitance and voltage ratings.
5. Storage: Store the capacitors in a dry, cool place away from direct sunlight and sources of heat.

Handling Precautions:

• ESD Protection: Handle the capacitors with ESD protection to avoid damage from static electricity.
• Avoid Mechanical Stress: Do not apply excessive mechanical stress to the leads or body of the capacitor during handling or assembly.
• Humidity Control: Keep the capacitors in their original packaging until ready for use to prevent moisture absorption.

(For reference only)