Details

---

BUY XTR117AIDGKR https://www.utsource.net/itm/p/12562494.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	-	36	V	Operating supply voltage range
Output Current	IOUT	0	-	20	mA	Maximum output current
Line Regulation	-	-	0.01	0.05	%/V	Change in output voltage with input voltage
Load Regulation	-	-	0.01	0.05	%/mA	Change in output voltage with load current
Temperature Coefficient	-	-	25	50	ppm/°C	Change in output voltage with temperature
Quiescent Current	IQ	0.1	-	1	mA	Current consumed by the device itself
Output Impedance	ZOUT	-	1	5	Ω	Resistance seen looking into the output
Operating Temperature	TA	-40	-	125	°C	Ambient temperature range
Storage Temperature	TSTG	-65	-	150	°C	Temperature range for storage

Instructions for Using the XTR117AIDGKR:

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the V_CC pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Configuration:

   • Connect the load to the OUT pin.
   • Ensure the load resistance is within the specified range to avoid damage to the device.

3. Thermal Management:

   • Place the device in a well-ventilated area or use a heatsink if operating at high temperatures or high output currents.
   • Monitor the temperature to ensure it stays within the operating temperature range.

4. Protection Circuits:

   • Use appropriate overvoltage and overcurrent protection circuits to safeguard the device from transient conditions.
   • Consider adding a capacitor between V_CC and GND to filter out noise and stabilize the supply voltage.

5. Testing and Troubleshooting:

   • Measure the output voltage and current to ensure they are within the expected ranges.
   • If the device is not functioning correctly, check for proper connections, supply voltage levels, and load conditions.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Handle the device with care to avoid physical damage.

(For reference only)