Details

---

BUY GBPC3510W https://www.utsource.net/itm/p/12562496.html

Parameter	Value	Unit
Input Voltage (Min)	200	V
Input Voltage (Max)	380	V
Output Voltage	24	V
Output Current (Max)	10	A
Efficiency	Up to 92%	%
Power Factor	>0.95
Operating Temperature	-20 to +70	°C
Storage Temperature	-40 to +85	°C
Humidity	0 to 95% (Non-condensing)	% RH
Protection Features	Overvoltage, Overcurrent, Short Circuit
Certifications	CE, UL, CCC
Dimensions (LxWxH)	100 x 60 x 25	mm
Weight	250	g

Instructions for Use:

1. Installation:

   • Ensure the power supply is installed in a well-ventilated area to prevent overheating.
   • Secure the power supply using the provided mounting holes.

2. Input Connection:

   • Connect the input wires to the AC input terminals. The input voltage range is 200V to 380V.
   • Ensure the polarity is correct to avoid damage.

3. Output Connection:

   • Connect the output wires to the DC output terminals.
   • The output voltage is fixed at 24V, and the maximum current is 10A.

4. Power On:

   • Turn on the power supply by connecting it to the mains.
   • Check the output voltage and current using a multimeter to ensure proper operation.

5. Operation:

   • Monitor the temperature and ensure it stays within the operating range (-20°C to +70°C).
   • Regularly inspect the power supply for any signs of wear or damage.

6. Safety Precautions:

   • Do not operate the power supply in environments with high humidity or condensation.
   • Do not exceed the maximum input voltage or output current ratings.
   • In case of any malfunction, disconnect the power supply from the mains immediately.

7. Maintenance:

   • Clean the power supply with a dry cloth. Avoid using water or cleaning solvents.
   • Periodically check the connections and tighten any loose terminals.

8. Troubleshooting:

   • If the power supply fails to start, check the input voltage and connections.
   • If the output voltage is incorrect, verify the load and connections.
   • For persistent issues, contact the manufacturer for support.

(For reference only)