Details

---

BUY KST92 https://www.utsource.net/itm/p/12562501.html

Parameter	Description	Value
Type	Component Type	Diode
Part Number	Model Number	KST92
Material	Semiconductor Material	Silicon
Maximum Reverse Voltage (VR)	Maximum voltage that can be applied in reverse direction without damaging the diode	100 V
Maximum Forward Current (IF)	Maximum current that can flow through the diode in the forward direction	150 mA
Peak Forward Surge Current (IFSM)	Maximum surge current that can be tolerated for a short duration	1 A
Forward Voltage Drop (VF)	Voltage drop across the diode when conducting in the forward direction at a specified current	1.0 V (at 150 mA)
Reverse Recovery Time (trr)	Time it takes for the diode to switch from conducting in the forward direction to blocking in the reverse direction	30 ns
Operating Temperature Range (Top)	Temperature range within which the diode can operate safely	-65°C to +150°C
Storage Temperature Range (Tstg)	Temperature range within which the diode can be stored without damage	-65°C to +150°C
Package Type	Physical package of the diode	DO-35
Mounting Type	Method of mounting the diode	Through-hole

Instructions for Use:

1. Handling:

   • Handle the KST92 with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Soldering:

   • Solder the diode at a temperature not exceeding 260°C for a maximum of 10 seconds.
   • Allow the diode to cool naturally after soldering to avoid thermal shock.

3. Mounting:

   • Ensure that the diode is securely mounted to prevent mechanical stress.
   • Avoid applying excessive force or torque during installation.

4. Operation:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Ensure that the operating temperature is within the specified range to avoid thermal damage.
   • Use appropriate heat sinks if necessary to dissipate heat effectively.

5. Storage:

   • Store the diode in a dry, cool place to prevent moisture damage.
   • Keep the diode away from direct sunlight and sources of high temperature.

6. Testing:

   • Use a multimeter to test the diode for continuity and proper function.
   • Ensure that the diode is not damaged before installing it in a circuit.

(For reference only)