Details

---

BUY CA3189E https://www.utsource.net/itm/p/12590998.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	Vcc	-	4.5	-	18	V
Output Current	Iout	-	-	200	-	mA
Input Voltage Range	Vin	-	0	-	Vcc - 1.5	V
Quiescent Current	Iq	Vcc = 5V, no load	-	10	-	μA
Offset Voltage	Vos	Vcc = 5V	-	5	-	mV
Slew Rate	SR	-	-	0.5	-	V/μs
Bandwidth	BW	-	-	1	-	MHz
Power Dissipation	Pd	Tc = 25°C	-	600	-	mW

Instructions for Using CA3189E

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 18V.
   • Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the ground (GND) pin.

2. Input Signals:

   • The input voltage (Vin) should be between 0V and Vcc - 1.5V.
   • Connect the input signal to the appropriate input pins (IN+ and IN-).

3. Output Configuration:

   • The output current (Iout) can be up to 200mA.
   • Connect the load to the output pin (OUT) and ensure it is within the specified current limits.

4. Quiescent Current:

   • The quiescent current (Iq) is typically 10μA at 5V with no load.
   • This value helps in understanding the power consumption of the device under no-load conditions.

5. Offset Voltage:

   • The offset voltage (Vos) is typically 5mV at 5V.
   • This parameter is important for precision applications where small voltage differences matter.

6. Slew Rate:

   • The slew rate (SR) is typically 0.5V/μs.
   • This parameter indicates how quickly the output voltage can change in response to a step input.

7. Bandwidth:

   • The bandwidth (BW) is typically 1MHz.
   • This parameter specifies the frequency range over which the device can operate effectively.

8. Power Dissipation:

   • The maximum power dissipation (Pd) is 600mW at 25°C.
   • Ensure proper heat sinking or cooling if operating near this limit to avoid overheating.

9. Operating Temperature:

   • The device is designed to operate within a temperature range of -40°C to +85°C.
   • Ensure that the ambient temperature does not exceed these limits to prevent damage.

10. Storage and Handling:

    • Store the device in a dry, cool place away from direct sunlight.
    • Handle the device with care to avoid static discharge and physical damage.

By following these instructions, you can ensure optimal performance and longevity of the CA3189E.

(For reference only)