Details

---

BUY MC33072ADR2G https://www.utsource.net/itm/p/12591000.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage range	2.0	-	36.0	V
Quiescent Current	Supply current at no load	-	50	-	μA
Output Current	Maximum output current per channel	-	-	10	mA
Output Voltage Swing	Voltage swing from rail to rail	0.5	-	0.5	V
Input Offset Voltage	Difference between the inverting and non-inverting input voltages	-	2.0	-	mV
Input Bias Current	Current flowing into the inverting and non-inverting inputs	-	10	-	nA
Common-Mode Rejection Ratio (CMRR)	Ability to reject common-mode signals	80	-	-	dB
Power Dissipation	Maximum power dissipation	-	-	625	mW
Operating Temperature Range	Temperature range for operation	-40	-	125	°C
Storage Temperature Range	Temperature range for storage	-65	-	150	°C

Instructions for Using MC33072ADR2G

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 2.0V to 36.0V.
   • Use appropriate decoupling capacitors (e.g., 0.1μF and 10μF) close to the Vcc and GND pins to stabilize the supply.

2. Quiescent Current:

   • The quiescent current is typically 50μA. This should be considered in low-power applications.

3. Output Current:

   • Each channel can source or sink up to 10mA. Ensure that the load does not exceed this limit to avoid damage.

4. Output Voltage Swing:

   • The output voltage can swing within 0.5V of the supply rails. Design your circuit to accommodate this limitation.

5. Input Offset Voltage:

   • The typical input offset voltage is 2.0mV. This should be taken into account when designing precision circuits.

6. Input Bias Current:

   • The typical input bias current is 10nA. High impedance sources may require additional considerations to minimize errors.

7. Common-Mode Rejection Ratio (CMRR):

   • The CMRR is 80dB, indicating good rejection of common-mode signals. This is beneficial in noisy environments.

8. Power Dissipation:

   • The maximum power dissipation is 625mW. Ensure adequate heat sinking if operating near this limit.

9. Operating Temperature Range:

   • The device can operate from -40°C to 125°C. Ensure the ambient temperature is within this range.

10. Storage Temperature Range:

    • The device can be stored from -65°C to 150°C. Store in a dry environment to prevent moisture damage.

11. Handling:

    • Handle with care to avoid static discharge. Use proper ESD protection when handling the device.

12. Mounting:

    • Mount the device on a PCB with proper thermal management techniques to ensure reliable operation.

13. Testing:

    • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.

(For reference only)