Details

---

BUY C8051F410-GQ https://www.utsource.net/itm/p/12591002.html

Parameter	Description	Value	Unit
Package	Type of package	QFN-32	-
Operating Voltage (VDD)	Supply voltage range	2.7 to 3.6	V
Operating Temperature	Temperature range for operation	-40 to +85	°C
Clock Frequency	Maximum clock frequency	25	MHz
Flash Memory	Program memory size	16	KB
RAM	Data memory size	1	KB
Analog-to-Digital Converter (ADC)	Number of ADC channels	8	-
Digital-to-Analog Converter (DAC)	Number of DAC channels	2	-
Serial Communication Interfaces	Number of UARTs, SPIs, I2Cs	1 UART, 1 SPI, 1 I2C	-
Timer/Counters	Number of timer/counters	3	-
Interrupt Sources	Number of interrupt sources	21	-
Watchdog Timer	Watchdog timer availability	Yes	-
Brown-out Reset (BOR)	Brown-out reset availability	Yes	-
Power-On Reset (POR)	Power-on reset availability	Yes	-
Low-Voltage Detection (LVD)	Low-voltage detection availability	Yes	-
Power Management	Power-down modes	Idle, Power-down, Power-save	-
Capacitive Touch Sensing	Capable of capacitive touch sensing	Yes	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7 to 3.6V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Clock Configuration:

   • The internal oscillator can be configured for frequencies up to 25 MHz.
   • External crystal or ceramic resonators can also be used for precise timing.

3. Memory Management:

   • Utilize the 16 KB of Flash memory for program storage.
   • Use the 1 KB of RAM for data storage and variables.

4. Analog-to-Digital Conversion:

   • Configure the 8-channel ADC for analog signal acquisition.
   • Set the resolution and conversion rate as needed.

5. Digital-to-Analog Conversion:

   • Use the 2-channel DAC for generating analog signals.
   • Configure the output range and resolution.

6. Serial Communication:

   • Initialize UART, SPI, and I2C interfaces for communication with other devices.
   • Set baud rates and other parameters as required.

7. Timer/Counter Usage:

   • Configure the 3 timer/counters for various timing and counting tasks.
   • Use them for PWM generation, event counting, or time delays.

8. Interrupt Handling:

   • Enable and configure the 21 interrupt sources to handle events efficiently.
   • Write interrupt service routines (ISRs) to process interrupts.

9. Power Management:

   • Implement power-down, power-save, and idle modes to reduce power consumption.
   • Use the watchdog timer to prevent system lock-ups.

10. Protection Features:

    • Enable Brown-out Reset (BOR), Power-On Reset (POR), and Low-Voltage Detection (LVD) to ensure reliable operation under varying power conditions.

11. Capacitive Touch Sensing:

    • Configure the capacitive touch sensing feature for user interface applications.
    • Calibrate the touch sensors for optimal sensitivity and reliability.

For detailed programming and configuration, refer to the C8051F410 datasheet and application notes provided by Silicon Labs.

(For reference only)