Details

---

BUY ISPLSI1032E-70LJ https://www.utsource.net/itm/p/12591016.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating voltage range	4.5	-	5.5	V
Standby Current (ICC)	Quiescent current at VCC = 5V	-	10	-	μA
Output High Voltage (VOH)	Output high voltage at VCC = 5V, IOL = 0.4mA	-	4.7	-	V
Output Low Voltage (VOL)	Output low voltage at VCC = 5V, IOH = -0.4mA	-	0.4	-	V
Input Leakage Current (IIL)	Input leakage current at VI = 0V to VCC	-	±1	-	μA
Propagation Delay Time (tpd)	Propagation delay time at VCC = 5V, TA = 25°C	-	8	-	ns
Power Dissipation (PD)	Maximum power dissipation	-	-	350	mW
Operating Temperature (TA)	Ambient operating temperature range	-40	-	85	°C
Storage Temperature (Tstg)	Storage temperature range	-65	-	150	°C

Instructions for ISPLSI1032E-70LJ:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
   • Connect a decoupling capacitor (typically 0.1μF) close to the VCC and GND pins to minimize noise.

2. Input Handling:

   • Keep input voltages within the range of 0V to VCC to avoid damage.
   • Ensure input signals are stable and within the specified input leakage current limits.

3. Output Handling:

   • Ensure output loads do not exceed the maximum current ratings.
   • Use appropriate pull-up or pull-down resistors if needed to maintain stable output levels.

4. Temperature Considerations:

   • Operate the device within the ambient temperature range of -40°C to 85°C.
   • Store the device within the storage temperature range of -65°C to 150°C.

5. Electrostatic Discharge (ESD) Protection:

   • Handle the device with ESD precautions to prevent damage.
   • Use grounded wrist straps and static-safe work surfaces.

6. Mounting and Soldering:

   • Follow recommended soldering profiles to avoid thermal stress.
   • Ensure proper alignment and secure mounting on the PCB.

7. Testing and Verification:

   • Verify all connections and power supplies before applying power.
   • Test the device under typical operating conditions to ensure correct functionality.

(For reference only)