Details

---

BUY ZLG7290BS https://www.utsource.net/itm/p/12591185.html

Below is the parameter table and instructions for the ZLG7290BS:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Operating Temperature	Toper	-40		85	°C
Storage Temperature	Tstg	-65		150	°C
Output Current (per pin)	Iout		20	30	mA
Input Capacitance	Cin		10		pF
Output Capacitance	Cout		10		pF
Power Consumption	Pdiss		100		mW
Maximum Frequency	fmax		10	20	MHz

Instructions

1. Pin Configuration

• Vcc: Power supply input.
• GND: Ground.
• D0-D7: Data input/output lines.
• RST: Reset input.
• WR: Write control input.
• RD: Read control input.
• CS: Chip select input.
• INT: Interrupt output.

2. Power Supply

• Connect Vcc to a 5V power supply and GND to ground.
• Ensure the power supply is stable and within the specified range (4.5V to 5.5V).

3. Data Communication

• The ZLG7290BS supports parallel communication.
• Use D0-D7 for data transfer.
• Control the chip using the WR, RD, and CS signals.

4. Reset

• Apply a low pulse to the RST pin to reset the device.
• The reset pulse should be at least 100ns long.

5. Interrupt Handling

• The INT pin can be used to generate interrupts.
• Connect this pin to the interrupt input of your microcontroller or processor.

6. Programming

• Refer to the datasheet for specific command sequences and programming examples.
• Use the provided example code or development tools to facilitate integration.

7. Operating Conditions

• Ensure the operating temperature is within -40°C to 85°C.
• Store the device in a dry environment between -65°C and 150°C.

8. Handling Precautions

• Handle the device with care to avoid static discharge.
• Use proper ESD protection when handling the device.

9. Capacitance Requirements

• Add appropriate decoupling capacitors (10pF) near the Vcc and GND pins to ensure stable operation.

10. Maximum Ratings

• Do not exceed the maximum ratings for supply voltage, current, and power dissipation.
• Ensure the device does not operate beyond its maximum frequency of 20MHz.

For detailed specifications and advanced usage, refer to the official ZLG7290BS datasheet.

(For reference only)