Details

---

BUY TNY266PN https://www.utsource.net/itm/p/12591253.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage Range	VIN	85	-	265	V	Operating input voltage range
Output Voltage	VOUT	-	5.0	-	V	Nominal output voltage
Output Power	POUT	-	13	-	W	Maximum continuous output power
Quiescent Current	IQ	-	3.5	-	mA	Quiescent current at no load
Efficiency	η	-	78	-	%	Typical efficiency at full load
Switching Frequency	fSW	-	65	-	kHz	Typical switching frequency
Start-Up Time	tSTART	-	100	-	ms	Typical start-up time from application of input voltage
Protection Features	-	-	-	-	-	Overvoltage, overcurrent, short-circuit, and thermal shutdown protection
Operating Temperature	TOP	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTORAGE	-40	-	125	°C	Storage temperature range
Package Type	-	-	-	-	DIP-8	Dual In-line Package with 8 pins

Instructions for Use

1. Input Connection:

   • Connect the input voltage (V_IN) to the appropriate pin of the TNY266PN. Ensure that the input voltage is within the specified range of 85V to 265V.

2. Output Configuration:

   • The output voltage (V_OUT) is typically set to 5.0V. Use the feedback network to adjust the output voltage if necessary.

3. Power Handling:

   • The TNY266PN can deliver up to 13W of continuous output power. Ensure that the load does not exceed this limit to avoid overheating and potential damage.

4. Quiescent Current:

   • The quiescent current is approximately 3.5mA at no load. This should be considered when designing the power supply to minimize standby power consumption.

5. Efficiency:

   • The typical efficiency of the TNY266PN is around 78% at full load. Optimize the design for maximum efficiency by selecting appropriate components and minimizing parasitic losses.

6. Switching Frequency:

   • The typical switching frequency is 65kHz. This helps in reducing the size of external components such as inductors and capacitors.

7. Start-Up Time:

   • The typical start-up time is 100ms from the application of input voltage. This delay allows the internal circuits to stabilize before the output is enabled.

8. Protection Features:

   • The TNY266PN includes overvoltage, overcurrent, short-circuit, and thermal shutdown protection. These features help protect the device and the load from damage under fault conditions.

9. Operating Temperature:

   • The operating temperature range is from -40°C to 85°C. Ensure that the device is used within this range to maintain reliable operation.

10. Storage Temperature:

    • The storage temperature range is from -40°C to 125°C. Store the device in a dry, cool place to prevent damage.

11. Package Type:

    • The TNY266PN is available in a DIP-8 package. Ensure that the PCB layout and soldering process are compatible with this package type.

By following these parameters and instructions, you can ensure the proper and safe operation of the TNY266PN in your application.

(For reference only)