Details

---

BUY PIC16C54C04/P https://www.utsource.net/itm/p/12591258.html

Parameter	Description
Part Number	PIC16C54C04/P
Type	Microcontroller
Family	PIC16C5X
Package	PDIP (Plastic Dual Inline Package)
Pin Count	18
Program Memory Size	768 x 12-bit words
Data RAM Bytes	25 bytes
EEPROM	No
Clock Speed	Up to 10 MHz
I/O Pins	13
Operating Voltage (V)	2.0 to 5.5 V
Temperature Range	-40°C to +85°C
Power Consumption	Low power consumption
Program Memory Type	Flash
Watchdog Timer	Yes
Oscillator Types	LP (Low Power), XT (Crystal), HS (High Speed), INTRC (Internal RC)

Instructions for Use:

1. Power Supply: Connect the microcontroller to a power supply within the specified voltage range (2.0 to 5.5 V). Ensure stable power supply to avoid erratic behavior.

2. Oscillator Configuration: Choose the appropriate oscillator type based on your application requirements. Configure the oscillator by connecting external components as specified in the datasheet.

3. Programming: Program the PIC16C54C04/P using a suitable programmer that supports PIC microcontrollers. Use MPLAB X IDE or similar software for code development and debugging.

4. Pin Configuration: Configure I/O pins according to your application needs. Refer to the pinout diagram in the datasheet for correct pin assignments.

5. Watchdog Timer: Enable or disable the watchdog timer depending on the need for automatic reset functionality in case of software malfunction.

6. Reset Circuitry: Implement proper reset circuitry to ensure reliable operation. A pull-up resistor on the MCLR pin is typically required.

7. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to minimize noise and provide stable operation.

8. Development Tools: Utilize development tools such as MPLAB XC8 Compiler, MPLAB X IDE, and PICkit Programmer for efficient development and testing.

For detailed specifications and advanced configurations, refer to the official Microchip datasheet for the PIC16C54C04/P.

(For reference only)