Details

---

BUY STK453-060A https://www.utsource.net/itm/p/12591279.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	V_IN	Continuous	4.5		40	V
Output Voltage	V_OUT	Regulation		12		V
Output Current	I_OUT	Continuous		3	6	A
Efficiency	η	@ I_OUT = 3A		85		%
Switching Frequency	f_SW			150		kHz
Dropout Voltage	V_DO	@ I_OUT = 6A		1.2		V
Quiescent Current	I_Q	No Load		10		mA
Operating Temperature	T_OP		-40		85	°C

Instructions for STK453-060A

1. Input Connection:

   • Connect the input voltage (V_IN) to the designated input pin. Ensure the input voltage is within the specified range of 4.5V to 40V.

2. Output Configuration:

   • The output voltage (V_OUT) is regulated to 12V. Verify that the load requirements match this output voltage.

3. Current Handling:

   • The device can handle a continuous output current up to 6A. For applications requiring higher currents, consider heat dissipation or additional cooling methods.

4. Efficiency Considerations:

   • The efficiency is typically around 85% at an output current of 3A. Monitor the power consumption and thermal conditions accordingly.

5. Switching Frequency:

   • The switching frequency is set at 150kHz. This parameter affects the size of external components like inductors and capacitors.

6. Dropout Voltage:

   • At full load (6A), the dropout voltage is approximately 1.2V. Ensure the input voltage exceeds the sum of the output voltage and dropout voltage.

7. Quiescent Current:

   • With no load, the quiescent current is about 10mA. This value should be considered in low-power applications.

8. Temperature Range:

   • The operating temperature range is from -40°C to 85°C. Ensure the ambient temperature stays within these limits to maintain reliable operation.

9. Installation and Mounting:

   • Properly mount the device on a PCB with adequate space for heat dissipation. Follow manufacturer guidelines for optimal performance and safety.

(For reference only)