Details

---

BUY TAA970 https://www.utsource.net/itm/p/12591337.html

Below is the parameter table and instructions for the TAA970 IC:

TAA970 Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	4.5	5.0	5.5	V	-
Quiescent Current	Iq	-	2.5	-	mA	Vcc = 5V, no load
Output Current	Iout	-	15	20	mA	Per output channel
Operating Temperature	Temp	-40	-	85	°C	-
Storage Temperature	Tstg	-65	-	150	°C	-
Output Low Voltage	Vout(L)	-	0.4	-	V	Iout = 15mA
Output High Voltage	Vout(H)	-	4.6	-	V	Iout = -15mA
Input Voltage Range	Vin	0	-	5.5	V	-
Input Leakage Current	Iin	-	0.1	-	μA	Vin = 0V to 5.5V
Propagation Delay Time	tpd	-	20	-	ns	Vcc = 5V, CL = 15pF
Rise Time	tr	-	10	-	ns	Vcc = 5V, CL = 15pF
Fall Time	tf	-	10	-	ns	Vcc = 5V, CL = 15pF

TAA970 Instructions

1. Power Supply:

   • Ensure that the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations that could affect the performance of the IC.

2. Quiescent Current:

   • The quiescent current (Iq) is typically 2.5mA when no load is connected. This should be considered when designing the power supply circuit.

3. Output Current:

   • Each output channel can source or sink up to 20mA of current. However, it is recommended to limit the current to 15mA for optimal performance and reliability.

4. Operating Temperature:

   • The IC is designed to operate within a temperature range of -40°C to 85°C. Ensure that the operating environment does not exceed these limits to prevent damage or reduced performance.

5. Storage Temperature:

   • Store the IC in an environment with a temperature range of -65°C to 150°C to ensure long-term reliability.

6. Output Voltage Levels:

   • When the output is low (Vout(L)), the voltage should be around 0.4V or less.
   • When the output is high (Vout(H)), the voltage should be around 4.6V or more.

7. Input Voltage Range:

   • The input voltage (Vin) should be within the range of 0V to 5.5V to ensure proper operation of the IC.

8. Input Leakage Current:

   • The input leakage current (Iin) is typically 0.1μA. This should be taken into account when designing input circuits to avoid unintended behavior.

9. Propagation Delay Time:

   • The propagation delay time (tpd) is typically 20ns when Vcc is 5V and the load capacitance (CL) is 15pF. This delay should be considered in timing-sensitive applications.

10. Rise and Fall Time:

    • The rise time (tr) and fall time (tf) are both typically 10ns under the same conditions as the propagation delay time. These parameters are important for ensuring clean digital signals.

11. Handling:

    • Handle the IC with care to avoid static discharge, which can damage the sensitive components. Use proper ESD protection measures when handling the IC.

12. Mounting:

    • Ensure that the IC is mounted on a PCB with appropriate heat dissipation if it will be used in high-current or high-temperature applications.

13. Testing:

    • Before integrating the TAA970 into a final design, test the IC in a controlled environment to verify its performance and functionality.

By following these instructions, you can ensure that the TAA970 operates reliably and efficiently in your application.

(For reference only)