Details

---

BUY BTA41-800BWRG https://www.utsource.net/itm/p/12591368.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Repetitive Peak Off-State Voltage	VDRM	-	800	-	V	Tj = 25°C
Repetitive Peak Reverse Voltage	VRRM	-	800	-	V	Tj = 25°C
RMS On-State Current (Non-sinusoidal)	IT(RMS)	-	41	-	A	Tc = 70°C, f ≤ 50 Hz
Maximum RMS On-State Current	ITAV	-	41	-	A	Tc = 70°C
Non-Repetitive Peak On-State Current	ICM	-	160	-	A	Tj = 25°C, tp = 10 ms
Gate Trigger Current	IG(T)	5	-	50	mA	Tj = 25°C
Holding Current	IH	5	-	20	mA	Tj = 25°C
Gate Trigger Voltage	VG(T)	1.5	-	3	V	Tj = 25°C
Junction and Storage Temperature	Tj, Ts	-10	-	+125	°C
Storage Temperature	Tstg	-40	-	+125	°C

Instructions for BTA41-800BWRG

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid damage to leads or body.
   • Mount the device in a way that ensures proper heat dissipation if operating at high currents.

2. Electrical Connections:

   • Connect the gate terminal carefully to prevent short circuits.
   • Use appropriate wire gauges for connections to handle the rated current.

3. Thermal Management:

   • Operate within specified temperature ranges to ensure reliability.
   • Consider using heatsinks or cooling solutions if continuous operation near maximum temperatures is expected.

4. Voltage and Current Ratings:

   • Do not exceed the repetitive peak off-state voltage (VDRM) or repetitive peak reverse voltage (VRRM).
   • Stay within the RMS on-state current limits to avoid overheating.

5. Triggering:

   • Apply sufficient gate trigger current (IG(T)) and voltage (VG(T)) to ensure reliable switching.
   • Keep the holding current (IH) above the minimum required to maintain conduction.

6. Testing and Troubleshooting:

   • During testing, monitor the junction temperature (Tj) to prevent thermal runaway.
   • Check for correct triggering by verifying the gate signal integrity.

7. Storage:

   • Store in a dry, cool place within the storage temperature range (Tstg).

8. Safety Precautions:

   • Always use protective equipment when handling high-voltage components.
   • Follow all safety guidelines provided by the manufacturer.

(For reference only)