Details

---

BUY CAP200DG https://www.utsource.net/itm/p/12591373.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	CAP200DG	-
Type	Component Type	Capacitor	-
Capacitance	Nominal Capacitance	200	pF
Tolerance	Capacitance Tolerance	±5%	-
Voltage Rating	Maximum DC Voltage	50	V
Temperature Coefficient	Change in Capacitance with Temperature	NPO (0 ppm/°C)	ppm/°C
Operating Temperature Range	Temperature Range for Operation	-55 to +125	°C
Case Size	Physical Dimensions	0805 (2.0 x 1.25 mm)	mm
Termination	End Finish	Tin-Silver-Copper (SnAgCu)	-
Insulation Resistance	Minimum Insulation Resistance at 25°C	1000	MΩ
Dissipation Factor	Loss at 1 kHz	0.1%	-
Mounting Type	Mounting Method	Surface Mount (SMD)	-
RoHS Compliance	Environmental Standard Compliance	Yes	-

Instructions:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Use a temperature-controlled soldering iron set to 300-350°C.
   • Soldering time should not exceed 3 seconds per connection.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Place the capacitor on the PCB according to the silk screen markings.
   • Ensure the correct orientation if applicable (though this capacitor is non-polarized).

4. Testing:

   • After assembly, perform a visual inspection to ensure proper placement and soldering.
   • Measure the capacitance using a multimeter or LCR meter to verify it is within the specified tolerance.

5. Usage:

   • Do not exceed the maximum voltage rating.
   • Avoid exposing the capacitor to temperatures outside the operating range.
   • For optimal performance, use in circuits where stable capacitance is required, such as in filters or oscillators.

(For reference only)