Details

---

BUY HEF4066BP,652 https://www.utsource.net/itm/p/12591376.html

Parameter	HEF4066BP
Type	Quad Bilateral Analog Switch
Configuration	4 SPST switches
Supply Voltage (VDD)	-0.5V to 18V
Input Voltage Range	VSS +0.5V to VDD -0.5V
ON Resistance (R ON)	Max 75Ω @ VDD = 10V, TA = 25°C
OFF Leakage Current	±1nA @ VDD = 10V, TA = 25°C
Propagation Delay	6ns @ VDD = 10V, TA = 25°C
Operating Temperature	-40°C to +85°C
Package	PDIP-14, SOIC-14

Instructions for Use:

1. Power Supply Connection: Connect the supply voltage (VDD) and ground (VSS) pins appropriately. Ensure the supply voltage is within the specified range (-0.5V to 18V).

2. Signal Input/Output: Connect input signals to the switch inputs (pins 1, 3, 5, 12) and outputs to the corresponding switch outputs (pins 2, 4, 13, 14). The control inputs (pins 6, 7, 15, 9) determine whether each switch is open or closed.

3. Control Logic: Apply a logic high (close switch) or low (open switch) to the control inputs based on your application requirements. Ensure control voltages are within the valid input voltage range.

4. Handling Precautions: Due to electrostatic sensitivity, handle the device with care. Use proper ESD protection practices during handling and installation.

5. Mounting: Mount the device on a suitable PCB ensuring correct orientation and alignment of pins. Follow manufacturer guidelines for soldering temperature and time to avoid damage.

6. Testing: After mounting, test the functionality by applying known input signals and verifying output responses. Check for correct operation under various supply voltages and temperatures as needed.

Note: Always refer to the latest datasheet from the manufacturer for detailed specifications and additional information.

(For reference only)