Details

---

BUY PALCE22V10H-15SC/4 SOIC24 SMD https://www.utsource.net/itm/p/12591379.html

Parameter	Description	Value
Package Type	Package Style	SOIC-24
Mounting Type	Mounting Style	Surface Mount (SMD)
Logic Family	Logic Family	PAL (Programmable Array Logic)
Number of I/Os	Number of Input/Output Pins	22
Supply Voltage (Vcc)	Operating Supply Voltage	5V ± 0.25V
Operating Temperature	Temperature Range for Operation	-40°C to +85°C
Storage Temperature	Temperature Range for Storage	-65°C to +150°C
Programming Voltage	Voltage Required for Programming	12.6V ± 0.6V
Programming Current	Current During Programming	10mA (max)
Output Drive Current	Maximum Output Current per Pin	20mA (sink), 10mA (source)
Propagation Delay	Typical Propagation Delay Time	10ns (max)
Power Consumption	Maximum Power Consumption at Vcc = 5V	100mW (max)
Programming Method	Method of Programming	In-Circuit or Off-Line
Program Memory	Non-Volatile Memory for Storing Configuration	EEPROM
Polarity	Polarity of Outputs	CMOS
Lead Finish	Finish on Leads	Tin (Sn)
RoHS Compliance	Compliance with RoHS Standards	Yes

Instructions for Use:

1. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store in a dry, temperature-controlled environment within the specified storage temperature range.

2. Mounting:

   • Ensure the correct orientation of the device during mounting.
   • Apply solder paste to the pads and place the device carefully.
   • Use a reflow soldering process with appropriate temperature profiles to ensure good solder joints.

3. Powering the Device:

   • Connect the Vcc pin to a stable 5V supply.
   • Ground the GND pin to a common ground reference.

4. Programming:

   • Use a compatible programmer to program the device.
   • Set the programming voltage to 12.6V ± 0.6V and ensure the programming current does not exceed 10mA.
   • Follow the specific programming algorithm provided by the manufacturer.

5. Testing:

   • After programming, test the device to ensure it functions as expected.
   • Verify the output signals and timing parameters.

6. Operation:

   • Operate the device within the specified operating temperature range.
   • Monitor the power consumption to ensure it does not exceed the maximum ratings.

7. Troubleshooting:

   • If the device does not function correctly, check the power supply, connections, and programming.
   • Refer to the datasheet for detailed troubleshooting steps and contact the manufacturer for further assistance if needed.

(For reference only)