Details

---

BUY HMC336MS8G https://www.utsource.net/itm/p/12591442.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vdd)	Operating supply voltage	4.75	5	5.25	V
Supply Current	Operating supply current	-	180	-	mA
Output Power	Output power at 1 dB compression	-	13	-	dBm
Gain	Small signal gain	-	16	-	dB
Noise Figure	Noise figure	-	2.5	-	dB
Input Return Loss	Input return loss	-	15	-	dB
Output Return Loss	Output return loss	-	15	-	dB
Third-Order Intercept	Output third-order intercept point	-	33	-	dBm
Operating Temperature	Operating temperature range	-40	-	85	°C

Instructions for HMC336MS8G

1. Power Supply: Connect the supply voltage (Vdd) to pin 8 and ensure it is within the specified range of 4.75V to 5.25V. Use a stable power source to avoid fluctuations.

2. Biasing: The amplifier does not require external bias components; it is internally matched to 50 ohms.

3. Input Signal: Apply the RF input signal to pin 1. Ensure the input signal level is appropriate to avoid saturating the amplifier.

4. Output Signal: Take the output from pin 8. Be cautious with load impedance matching to achieve optimal performance.

5. Grounding: Properly ground all ground pins (pins 2, 3, 4, 5, 6, 7) to ensure stability and minimize noise.

6. Temperature Considerations: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.

7. Handling Precautions: Handle the device with care to prevent damage from electrostatic discharge (ESD). Use proper ESD protection measures when handling or soldering.

8. Installation: Mount the device on a suitable PCB with appropriate thermal management to handle the operating current and dissipate heat effectively.

9. Testing: After installation, test the amplifier under typical operating conditions to verify performance parameters such as gain, noise figure, and output power.

(For reference only)