Details

---

BUY NE571N https://www.utsource.net/itm/p/12591445.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	10	30	V
Input Voltage Range	Vin	-2		2	V (Vcc=10V)
Output Voltage Range	Vout	-2		2	V (Vcc=10V)
Quiescent Current	IQ		1.5		mA
Input Impedance	Zin		10		kΩ
Output Impedance	Zout		600		Ω
Bandwidth	BW		10		kHz
Slew Rate	SR		0.5		V/μs
Common Mode Rejection Ratio	CMRR		80		dB
Power Supply Rejection Ratio	PSRR		80		dB
Operating Temperature	Temp	-40		85	°C

Instructions for Using the NE571N:

1. Power Supply:

   • Connect the supply voltage (Vcc) to the appropriate pin. The NE571N can operate from 4.5V to 30V.
   • Ensure the power supply is stable and within the specified range to avoid damage.

2. Input Signal:

   • Apply the input signal to the input pin. The input voltage range should be between -2V and +2V when Vcc is 10V.
   • Ensure the input impedance of 10kΩ is considered when designing the input circuit.

3. Output Signal:

   • The output signal will be available at the output pin. The output voltage range is also between -2V and +2V when Vcc is 10V.
   • The output impedance is 600Ω, which should be taken into account when connecting to the load.

4. Biasing:

   • Proper biasing is crucial for optimal performance. Refer to the datasheet for specific biasing configurations.

5. Temperature Considerations:

   • The NE571N operates within a temperature range of -40°C to 85°C. Ensure the operating environment does not exceed these limits.

6. Protection:

   • Implement necessary protection circuits such as clamping diodes to protect against overvoltage and reverse polarity.

7. Layout:

   • Use good PCB layout practices to minimize noise and ensure stable operation. Keep power and ground lines short and wide, and use decoupling capacitors close to the power pins.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.

For more detailed information, refer to the official datasheet of the NE571N.

(For reference only)