Details

---

BUY VL82C113A-FC https://www.utsource.net/itm/p/12591469.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.75	5.0	5.25	V
Operating Temperature	Toper	-40		85	°C
Storage Temperature	Tstg	-65		150	°C
Input Low Voltage	VIL	0		1.5	V
Input High Voltage	VIH	3.5		5.25	V
Output Low Voltage	VOL	0	0.4	0.6	V	@ IOL = 16 mA
Output High Voltage	VOH	4.4		5.25	V	@ IOH = -4 mA
Propagation Delay Time	tpd	5		10	ns
Power Consumption	ICC		100		μA	@ Vcc = 5V, f = 1 MHz
Maximum Output Current	IO			25	mA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.75V to 5.25V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Temperature Considerations:

   • The device operates reliably within the temperature range of -40°C to 85°C.
   • Store the device in an environment with temperatures between -65°C and 150°C.

3. Input Levels:

   • Input signals should be within the valid logic levels: VIL ≤ 1.5V for LOW and VIH ≥ 3.5V for HIGH.

4. Output Levels:

   • The output will be LOW (VOL ≤ 0.6V) when the output current (IOL) is 16 mA.
   • The output will be HIGH (VOH ≥ 4.4V) when the output current (IOH) is -4 mA.

5. Propagation Delay:

   • The propagation delay time (tpd) is typically 5 to 10 nanoseconds. This is crucial for timing considerations in your circuit design.

6. Power Consumption:

   • The typical power consumption (ICC) is 100 μA at Vcc = 5V and a frequency of 1 MHz. Ensure your power supply can handle this load.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection when handling the component.

8. Mounting:

   • Follow the recommended soldering profile for the FC (Flip Chip) package to ensure reliable mounting on the PCB.

9. Testing:

   • Test the device under the specified operating conditions to verify its functionality before integrating it into your final design.

10. Compliance:

    • Ensure that the device complies with all relevant standards and regulations for your application.

(For reference only)