Details

---

BUY TMP86FH47UG https://www.utsource.net/itm/p/12591790.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.7	-	5.5	V	Operating supply voltage range
Operating Temperature	Topr	-40	-	125	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range
Output Current	Iout	-	10	20	mA	Maximum output current
Input Offset Voltage	Vos	-	2	4	mV	Input offset voltage at 25°C
Common-Mode Input Range	Vcm	0	-	Vcc	V	Input common-mode voltage range
Bandwidth	fBW	-	1	-	MHz	Typical bandwidth
Quiescent Current	IQ	-	10	30	μA	Quiescent current at 25°C
Rise/Fall Time	tr/f	-	50	-	ns	Rise and fall time
Propagation Delay	tpd	-	25	-	ns	Propagation delay
Output Low Voltage	Vol	0	0.4	0.8	V	Output low voltage at 25°C
Output High Voltage	Voh	4.2	4.6	5	V	Output high voltage at 25°C (Vcc = 5V)

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (e.g., 0.1μF and 10μF) close to the power pins to reduce noise and improve stability.

2. Temperature Considerations:

   • The device is designed to operate over a wide temperature range (-40°C to 125°C). Ensure that the ambient temperature does not exceed these limits to avoid damage or performance degradation.
   • Store the device in an environment with temperatures between -65°C and 150°C.

3. Output Current:

   • The maximum output current is 20mA. Ensure that the load does not draw more than this to prevent damage to the device.
   • For applications requiring higher current, consider using a buffer or driver circuit.

4. Input Signal:

   • The input common-mode voltage range is from 0V to Vcc. Ensure that the input signals do not exceed these limits to avoid distortion or damage.
   • The input offset voltage can vary from 2mV to 4mV at 25°C. This should be taken into account when designing precision circuits.

5. Bandwidth and Timing:

   • The typical bandwidth is 1MHz, suitable for most analog and digital signal processing applications.
   • The rise and fall times are typically 50ns, and the propagation delay is 25ns. These parameters are important for timing-critical applications.

6. Output Levels:

   • The output low voltage (Vol) is typically 0.4V at 25°C, and the output high voltage (Voh) is typically 4.6V at 25°C when Vcc is 5V. These levels should be considered when interfacing with other logic families.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper soldering techniques and use a temperature-controlled soldering iron to prevent thermal damage during assembly.

8. Mounting and Layout:

   • Place the device on a PCB with proper ground planes and power distribution to minimize noise and ensure stable operation.
   • Keep signal traces short and direct to reduce parasitic effects and improve performance.

(For reference only)