Details

---

BUY IXFK140N30P https://www.utsource.net/itm/p/12591797.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	V CES	-	-	300	V
Emitter-Collector Voltage	V ECS	-	-	300	V
Gate-Emitter Voltage	V GES	-15	-	15	V
Continuous Collector Current	I C	-	140	-	A	T C = 25°C
Pulse Collector Current	I CM	-	700	-	A	t p = 10 μs, I GC = 0
Power Dissipation	P T	-	-	1800	W	T C = 25°C
Junction Temperature	T J	-	-	175	°C
Storage Temperature	T STG	-55	-	175	°C

Instructions for Use:

1. Handling and Installation:

   • Handle the IXFK140N30P with care to avoid damage to the pins and body.
   • Ensure that the device is properly mounted on a heatsink to manage heat dissipation effectively.

2. Electrical Connections:

   • Verify all electrical connections are secure and correct before applying power.
   • Connect the gate resistor close to the gate pin to minimize noise pickup.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Keep the junction temperature within specified limits to ensure reliable operation.

4. Thermal Management:

   • Monitor the device temperature during operation and ensure adequate cooling.
   • Use thermal paste between the device and heatsink for better thermal conductivity.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.

6. Safety Precautions:

   • Always follow safety guidelines when working with high voltage and current levels.
   • Use appropriate protective equipment such as gloves and safety glasses.

(For reference only)