Details

---

BUY SAF7746HW/100 https://www.utsource.net/itm/p/12591835.html

Parameter	Description	Value
Part Number	Full Part Number	SAF7746HW/100
Function	Device Type	Low Noise Amplifier (LNA)
Frequency Range	Operating Frequency	2.4 GHz to 2.5 GHz
Gain	Gain at 2.45 GHz	18 dB 卤 1 dB
Noise Figure	Noise Figure at 2.45 GHz	1.0 dB 卤 0.3 dB
Input Power	Maximum Input Power	+10 dBm
Output Power	Output Power at 1 dB Compression	+10 dBm
Supply Voltage	Operating Voltage	2.7 V to 5.5 V
Supply Current	Typical Supply Current	20 mA
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Package	Package Type	SOT-89-3
Pin Configuration	Pin 1	RF Input
Pin Configuration	Pin 2	Vcc
Pin Configuration	Pin 3	RF Output

Instructions for Use:

1. Power Supply:

   • Connect the Vcc pin (Pin 2) to a stable power supply within the range of 2.7 V to 5.5 V.
   • Ensure that the power supply is well-decoupled with a 0.1 渭F capacitor placed close to the Vcc pin.

2. RF Connections:

   • Connect the RF input signal to Pin 1.
   • Connect the RF output from Pin 3 to your next stage or load.
   • Use appropriate matching networks to ensure optimal impedance matching at both input and output ports.

3. Biasing:

   • The device is internally biased, so no external biasing components are required.
   • Ensure that the Vcc pin is powered before applying any RF signals to avoid damage.

4. Thermal Management:

   • Ensure adequate heat dissipation by mounting the device on a suitable PCB with a ground plane.
   • For high-power applications, consider adding a heatsink or thermal pad under the package.

5. Storage and Handling:

   • Store the device in a dry, static-free environment.
   • Handle the device with care to avoid damage to the pins or the package.

6. Testing:

   • Before final assembly, test the device using a signal generator and spectrum analyzer to verify gain and noise figure.
   • Ensure that the device is not exposed to voltages or currents exceeding the specified limits during testing.

7. Soldering:

   • Use a soldering iron with a temperature setting appropriate for SOT-89-3 packages.
   • Avoid overheating the device during soldering, as this can cause damage.

8. Documentation:

   • Refer to the datasheet for more detailed information and application notes.
   • Follow all safety guidelines and regulations when handling and operating the device.

(For reference only)