Details

---

BUY VN10LM https://www.utsource.net/itm/p/12591926.html

Parameter	Symbol	Min	Typical	Max	Unit
Drain-Source Voltage	VDS	-	50	-	V
Gate-Source Voltage	VGS	-	卤20	-	V
Continuous Drain Current	IDS	-	1.0	-	A
Pulse Drain Current (t=10ms)	IDP	-	2.0	-	A
Gate Charge	QG	-	40	-	nC
Input Capacitance	Ciss	-	280	-	pF
Output Capacitance	Coss	-	35	-	pF
Reverse Transfer Capacitance	Crss	-	15	-	pF
On-State Resistance	RDS(on)	-	1.5	-	惟
Gate Threshold Voltage	VGS(th)	1.0	2.0	3.0	V
Total Power Dissipation	PD	-	1.25	-	W
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Handle with care to avoid damage to the leads and body.
   • Use ESD (Electrostatic Discharge) protection when handling.

2. Mounting:

   • Ensure proper alignment of the component during soldering.
   • Use a temperature-controlled soldering iron to avoid overheating.
   • Follow the recommended soldering profile provided by the manufacturer.

3. Biasing:

   • Apply the gate-source voltage (VGS) within the specified range to control the drain current (IDS).
   • Ensure that the gate-source voltage does not exceed the maximum rating to prevent damage.

4. Thermal Management:

   • Provide adequate heat sinking if operating at high power levels.
   • Monitor the junction temperature (TJ) to ensure it remains within the specified range.

5. Testing:

   • Use a multimeter or oscilloscope to verify the correct operation of the device.
   • Test the on-state resistance (RDS(on)) to ensure it is within the typical range.

6. Applications:

   • Suitable for switching applications in power supplies, motor control, and other high-frequency circuits.
   • Ensure the continuous drain current (IDS) and pulse drain current (IDP) ratings are not exceeded during operation.

7. Safety:

   • Do not exceed the maximum ratings for any parameter to avoid permanent damage to the device.
   • Follow all safety guidelines and regulations when designing and testing circuits.

(For reference only)